differential gears
#1
it WILL run
Thread Starter
differential gears
rear end is howling quite nicely
and the 3rd member needs replaceing
I know you can get a 4.7 from a kia sportage, as much fun as those would be they are a little short.
what can I scavenge some 4.2-4.44 3rd members from?
and the 3rd member needs replaceing
I know you can get a 4.7 from a kia sportage, as much fun as those would be they are a little short.
what can I scavenge some 4.2-4.44 3rd members from?
#7
ROTOR THAT PUSSY BITCH
Join Date: Oct 2002
Location: CANOGA PARK
Posts: 623
Likes: 0
Received 0 Likes
on
0 Posts
I need to know how you remove the damn axles.... damn GSL-SE axles... I've removed the 3 nuts holding the dust cover... the 2 nuts holding the brake calipers... the brake line is off.... the emergency brake line is also off... It still feels like something is holding it... I've 10 time check what could be holding it... I've even remove the 2 screw that's on the disk itself.... I can't remove it.... help...
Trending Topics
#8
it WILL run
Thread Starter
i dont know about the rx7 axles but the chevy one i have worked on had axle retainer clips inside the pumpkin they look sorta like the peice you bolt on to the bottom of the 'o' shape on a piston rod
#9
ROTOR THAT PUSSY BITCH
Join Date: Oct 2002
Location: CANOGA PARK
Posts: 623
Likes: 0
Received 0 Likes
on
0 Posts
The pumkin on the RX-7's don't open up like the chevy's... its either you remove the 3rd member or it's in there... the axles are not retained by any clips.... cuz I've done it before but on a GSL but it had a disk brake too... Now I'm just confused because I've leterally checked what could be snagging... but nothing... check if theirs more bolts and nuts to remove... nothing...
#12
Banned. I got OWNED!!!
Originally posted by Rotor13B
When I had to take out my third member, I had to pop the shafts out with a bfh,(big ****** hammer).
When I had to take out my third member, I had to pop the shafts out with a bfh,(big ****** hammer).
yup!!!! he has done it!!!! big fucken hammer!!!
sportage gears??? never heard of that!why not rebuild yours? or get a used posi unit?
#13
it WILL run
Thread Starter
ill look into a miata pumpkin, will it just bolt up to a '82 gs?
BTW how do you rebuild a diff. i thought the whining was from the gears wearing together
BTW how do you rebuild a diff. i thought the whining was from the gears wearing together
#14
Banned. I got OWNED!!!
could be the gears or the bearings, ypu can rebuild it! just get a ring and pinion , crush sleeve, bearings, and pinion seal! parts are very pricy though!
#15
Blood, Sweat and Rotors
iTrader: (1)
to get the axels out after you've taken all the brakes off, just keep hitting the axel flange with a rubber mallet.
4.444 gears are in the *front* diff of a 87-88 mazda 4x4 pickup if you can find one. cheap alternative.
the kia 4.778 r&p are supposed to be a direct swap in
-bp-
4.444 gears are in the *front* diff of a 87-88 mazda 4x4 pickup if you can find one. cheap alternative.
the kia 4.778 r&p are supposed to be a direct swap in
-bp-
#16
MY NEW NAME IS ROTARY 7S
Join Date: Jun 2002
Location: Cell Block 4 (LOCKDOWN)
Posts: 1,323
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by DriveFast7
to get the axels out after you've taken all the brakes off, just keep hitting the axel flange with a rubber mallet.
4.444 gears are in the *front* diff of a 87-88 mazda 4x4 pickup if you can find one. cheap alternative.
the kia 4.778 r&p are supposed to be a direct swap in
-bp-
to get the axels out after you've taken all the brakes off, just keep hitting the axel flange with a rubber mallet.
4.444 gears are in the *front* diff of a 87-88 mazda 4x4 pickup if you can find one. cheap alternative.
the kia 4.778 r&p are supposed to be a direct swap in
-bp-
Maybe ill ask some old friends if they have any spare parts laying around..
#17
Blood, Sweat and Rotors
iTrader: (1)
chuck clark over at mazspeed did the research and said the ring and pinion fits our diff.
99 and 2000 sportage 4wd auto and manual. and it looks like the 98 works too
http://mazspeed.bcrx7.com/forum/thre...4f98296036b35f
99 and 2000 sportage 4wd auto and manual. and it looks like the 98 works too
http://mazspeed.bcrx7.com/forum/thre...4f98296036b35f
#18
MY NEW NAME IS ROTARY 7S
Join Date: Jun 2002
Location: Cell Block 4 (LOCKDOWN)
Posts: 1,323
Likes: 0
Received 0 Likes
on
0 Posts
He said it works by theory it fits in a Miata and Miata fits in the RX7,Is he swaping the ring and pinion gear or the whole LSD?
I hope it fits,cause bitch it will be on, 4.777 muwhaha
I hope it fits,cause bitch it will be on, 4.777 muwhaha
#19
Senior Member
Join Date: Apr 2002
Location: Waco, Tx
Posts: 250
Likes: 0
Received 0 Likes
on
0 Posts
I am the guy who got them and i am they will be installed today. In order for me to retain the stock LSD i am simple removing the GSL carrier swap the ring gears and putting that into the kia third member. should all bolt up once im that far. And I shouldnt have to set up the gears again.
if you do the kia swap it is the front diff off of a kia sportage 4x4. It is a 4.778 43ring-9pinion
Ill let everyone here and at mazspee know how it goes after and how diffiult the swap is.
if you do the kia swap it is the front diff off of a kia sportage 4x4. It is a 4.778 43ring-9pinion
Ill let everyone here and at mazspee know how it goes after and how diffiult the swap is.
#24
---------------------
Join Date: Nov 2001
Location: Kamloops BC Canada
Posts: 2,029
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by SoRRoW
Hey...so you put the who differentual? gears and locker?
Hey...so you put the who differentual? gears and locker?
That'd be fun
#25
Senior Member
Join Date: Apr 2002
Location: Waco, Tx
Posts: 250
Likes: 0
Received 0 Likes
on
0 Posts
no all i am doing is this:
remove third member from Kia diff.
remove third member from my 83 GSL diff
remove carrier from Kia third member
remove carrier from GSL third member
remove GSL ring gear from GSL carrier
remove Kia ring gear from Kia carrier and swap onto the GSL carrier retaining the LSD
bolt GSL carrier(with kia 4.77) into the Kia third member
bolt Kia third member into the GSL diff.
Looks to be easiest way(shouldnt have to set up gears) and measurements show the third members should be the same and bolt in swappable.
If i can ever get that ******* axle out ill let yall know.
the damn car is starting to **** me off.
remove third member from Kia diff.
remove third member from my 83 GSL diff
remove carrier from Kia third member
remove carrier from GSL third member
remove GSL ring gear from GSL carrier
remove Kia ring gear from Kia carrier and swap onto the GSL carrier retaining the LSD
bolt GSL carrier(with kia 4.77) into the Kia third member
bolt Kia third member into the GSL diff.
Looks to be easiest way(shouldnt have to set up gears) and measurements show the third members should be the same and bolt in swappable.
If i can ever get that ******* axle out ill let yall know.
the damn car is starting to **** me off.