1st Generation Specific (1979-1985) 1979-1985 Discussion including performance modifications and technical support sections

Dash removal on an 83

Thread Tools
 
Search this Thread
 
Old 03-17-06 | 05:20 PM
  #1  
maxvol's Avatar
Thread Starter
Senior Member
iTrader: (2)
 
Joined: Jun 2005
Posts: 391
Likes: 0
From: Aurora
Dash removal on an 83

Hi guys I just got another 83 rx7 for the motor and the mint back/gray interior i will post pictures after but now I have a problem...

I started to take off the dash, I got everything out exept the main dash. I found a huge ammount of bolts everywhere along the dash and took off all of them ... now the dash is loose exept the middle right where the heater control is it seems to have a bolt or a screw that I cant find can anyone help me its somwhere right in the middle of the dash and i cant find itt, thanks for the help

max
Old 03-17-06 | 05:34 PM
  #2  
Keegan's Avatar
Senior Member

 
Joined: Feb 2005
Posts: 532
Likes: 0
From: Oregon
mine was above the glove box just one 10 mm
Old 03-17-06 | 06:33 PM
  #3  
candyassmiler's Avatar
Senior Member

 
Joined: Jul 2003
Posts: 342
Likes: 0
From: burkesville, kentucky
its a son of a bitch and makes you hate your life.
Old 03-17-06 | 07:52 PM
  #4  
Cowboyfun's Avatar
SoCal STi Hitman

 
Joined: Mar 2005
Posts: 880
Likes: 0
From: In a paint booth
Look under the dash, (take it out) then on the left behind the radio bezel there is your culprit.
BTW, I don't mean to thread jack, but do you want to sell that great black dash? Any other interior tidbits you might want to ditch?
Old 03-18-06 | 01:33 PM
  #5  
maxvol's Avatar
Thread Starter
Senior Member
iTrader: (2)
 
Joined: Jun 2005
Posts: 391
Likes: 0
From: Aurora
muhahahahahaha
I just bought the car fot that interior I have the great, burgandy interior I hate that ****.. Im sorry but I wantned black interior since I got the car.. do you want a burgandy dash???


-max
Old 03-18-06 | 04:07 PM
  #6  
RustyRotary's Avatar
Just soak it in 2-cycle
iTrader: (2)
 
Joined: Mar 2005
Posts: 576
Likes: 0
From: West Lafayette, IN
Originally Posted by maxvol
muhahahahahaha
I just bought the car fot that interior I have the great, burgandy interior I hate that ****.. Im sorry but I wantned black interior since I got the car.. do you want a burgandy dash???


-max
psh
try living with **** brown
Old 03-18-06 | 09:19 PM
  #7  
boyee's Avatar
keep it original!!
iTrader: (3)
 
Joined: Oct 2005
Posts: 1,329
Likes: 8
From: SF Bay Area, California
gotta love my tan leather!! with gold ext paint! 1982! GSL preimium sound system how rare is that?? hah sorry i couldnt help myself althought i would love an original red paint with black (leather? not sure if they made leather or cloth) interior. that would be suh-weet!
Old 03-18-06 | 09:42 PM
  #8  
shepski's Avatar
Full Member

 
Joined: Jan 2006
Posts: 199
Likes: 0
From: Perth, Australia
im in the process of finishing off a black/grey interior, when i took the dash out there was a screw bracket behind the guage pod towards the centre of the dash, that was my last PITA screw.
Old 03-19-06 | 10:30 AM
  #9  
maxvol's Avatar
Thread Starter
Senior Member
iTrader: (2)
 
Joined: Jun 2005
Posts: 391
Likes: 0
From: Aurora
"shepski" thanks that sounds like a good place to find that screw also I have another question what is holding the Guage pod in place I cant seem to find anything , does it mount from the back?

-Max
Old 03-19-06 | 02:20 PM
  #10  
Manntis's Avatar
add to cart
 
Joined: Jun 2002
Posts: 4,180
Likes: 0
From: Saskatoon, SK & Montreal, PQ
http://www.rotorhead.ca/topic.php?fl...=dashremoval_1

hope that helps
Old 03-19-06 | 08:59 PM
  #11  
shepski's Avatar
Full Member

 
Joined: Jan 2006
Posts: 199
Likes: 0
From: Perth, Australia
for the guage pod theres 2 black screws that are hard to see, they are on the top edge of the guage pod. careful pulling the polycarb shield out, you dont want to snap that. good luck.
Old 03-19-06 | 09:47 PM
  #12  
RustyRotary's Avatar
Just soak it in 2-cycle
iTrader: (2)
 
Joined: Mar 2005
Posts: 576
Likes: 0
From: West Lafayette, IN
Does anybody have dash removal instructions for 81-83?
Old 03-20-06 | 09:32 AM
  #13  
maxvol's Avatar
Thread Starter
Senior Member
iTrader: (2)
 
Joined: Jun 2005
Posts: 391
Likes: 0
From: Aurora
Finally I got the dash out soo many little bolts and screws and all sorts of stupid **** was there but all original which makes me happy cause mine is missing more then 1/2 the original hardware, all I have left that I dont need is the head liner its black and in great condition, but i cant use it I have the sunroof option and this one is a ful roof. Now all I have to do is swap all these parts into my burgandy interior.

does anyone know where I can get custom guages?

thanks for the help
-max
Old 03-22-06 | 07:50 PM
  #14  
Mr.ChuckyRx7's Avatar
Pistons R just Cars!

 
Joined: Apr 2005
Posts: 44
Likes: 0
From: Chesapeake, Va
I picked up a mint dash at the Junk yard for $35.00. Actualy the hold car was Spotless but the motor was dead. And YES LIKE I PICKED IT CLEAN!
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
The1Sun
New Member RX-7 Technical
5
09-15-15 04:45 PM
The1Sun
1st Generation Specific (1979-1985)
0
09-07-15 10:21 PM



Quick Reply: Dash removal on an 83



All times are GMT -5. The time now is 06:15 PM.