driftking777

iTrader: (1)

ok i'll start off with yes i know there a douche company. However i didnt when i ordered from them 5-6 months ago..my mistake. However i actually started this thread to see if anyone has there phone # and know that it works? Im tired of waiting (if you can consider it waiting or thinking your moneys just been stolen) and just want my money back or my damn product so i can sell it on here to recoupe my losses. Anyhow thank it advance to anyone that can help me.

~nick

Jose Feliciano

http://www.cpracing.ca/
I see they took there number off the web address call information in canada and give there address and see if they can give you a number they are a fucked up company

vipernicus42

iTrader: (4)

I did a search on Canada411.com for any companies listed in that postal code. There are 14 companies listed at the address on their website, none named CP Racing.

About halfway down the page there's a place called "Tuner Transformation" which is the only business whose description seems to fit. Maybe that's them, but if not, they probably have the contact info for CP.

http://canada411.yellowpages.ca/sear...&Search=Search

If you post in the Canadian section you might get more info, just beware that many of them may lash out at you because they've been screwed by CP like you have. I'd count your money gone for the most part, which sucks.

Jon

Dan_s_young

iTrader: (1)

Tuner transformation is the Canadian car show that they put on there. If you ever catch that show you can always see FB's in the background that I assume are there to get CPracing products installed. If you called that number im sure you could get ahold of them...

They have always seemed VERY VERY shady in my opinion, and 14 companies at the same address confirms my suspisions.

Roundabout

iTrader: (8)

I wonder why they haven't been shut down yet. It's just rediculous how many people are/were rammed in the *** by this company.

vipernicus42

iTrader: (4)

It's unfortunate that we don't have many rotary shops in Canada. The ones that seem to pop up the most use the fact that they're in a niche market to take advantage of people.

Luckily, with CP's downfall, we actually did get a good shop in the same area that has sprung up JoeRPM from the Canadian Section quit his old job to go full-time on his shop, and so far results seem to be good

Jon

perfect_circle

ive heard they went belly up, which, i hate to say it, means your probably not going to get your stuff

classicauto

iTrader: (3)

He's still there.

Nothing's gone belly up - so to speak anyways - when I did an episode of war of the wheels with Chris I could never get a hold of him on the number he gave me. I'd always call, leave a message, then get a call back. Seemed weird at the time but now I realize why........

Keep up the hunt, I do know a few guys who live around the area of the shop - I could have them drop by and pick up your parts........perhpas anyways...........and that assuming he'll let them go, or even has them.

PM me with any info you've got about the sale and Ill see what I can do....

The Wankler

iTrader: (14)

He is a lowlife scumbag!

nick812

I find it funny that we have many great RX-7 companys some even have people on here keeping us up to date on new stuff there doing. But i have never seen anyone from CP on here? Make you wonder. Well at least it make me wonder. LOL

The Wankler

iTrader: (14)

he is in the canadian forum every so often. The guy is royal scum. he holds your money, uses it for another project, leaving you hanging until he gets to feeling bad about it. That takes about 9 months...... Now, if he is still selling on ebay, i can help you.

John64

Yeah, I heard they went under too.

rolfs_7

did u guys see that you can become a CP racing dealer at the bottom of the page HA!

vipernicus42

iTrader: (4)

Unfortunately the bad ones always seem to be the hardest to kill.

"Rx7Heaven" in Ottawa was one example of a place that just refused to die until recently. Damn place screwed *so* many people, and they bought all the local 7s out of all the local yards, leaving them to rot, or to charge you $50 for a used clutch cylinder that doesn't work... no returns of course... $75 for a used starter that was blown.. again no returns.... $4000 to "rebuild" my friend's blown 12a, and by rebuild they mean ATF one of the ones in the junkyard and toss it in there.. Oops, they dropped the engine on the header panel, then told Eric that the oil-pan shaped dent in his front panel was "there when you dropped it off"

Bastages.

Jon

rolfs_7

wow thats some tough stuff there ^^^^

Rx Seven

iTrader: (12)

CP racing didnt close down didnt they just get a new name. Ive been on the new sight and they have all the same parts. Ill try and find it for you.

dbragg

iTrader: (7)

tuner transformation is CP.

look at the CP sight or ebay auctions and youll see the orange FB with the black hood. that car is also seen in the background on tuner transformation. ive also seen Cp racing banners in the background on tuner transformation.

dbragg

iTrader: (7)

heres some info a little birdy told me:

CP Racing
CP Racing & Design
1440 Tottenham Rd., Tottenham, Ontario, L0G 1W0
Contact: Christopher Campitelli, C.O.O.
Tel: (905)936-5151
Email: farmz1@hotmail.com


Posted looking for shop help on 11-7-06 located in Brampton area
http://toronto.kijiji.ca/c-jobs-oth...0QQAdIdZ7466615



Old Stuff:

http://ca.geocities.com/farmz1ca/RX7_Strut_Bars.html

http://ca.pg.photos.yahoo.com/ph/farmz1ca/my_photos

877 Baylawn Drive Pickering ON L1X2N7 Canada
416-896-5448


877 Baylawn Drive
Pickering, L1V2P9
905 831-8879

CP Racing
19 Robb Boulevard, Orangeville, ON L9W3L1
(519) 940-9225
rx7stuff@hotmail.com

jjlrx7

i still need those special lugs for the wheel conversion. gonna cost about 300 to have made locally. bastards indeed.

R.P.M.

iTrader: (3)

The Tottenham address is the last place they were working out of.... I used to work for them back a few years ago when they were doing OK.
The Orangeville address was where I met them first and started working for them.

I find it kinda wierd that after I quit working for them they seemed to go all down hill from there.....now my business I started has grown considerably!! Hmmm

Dan_s_young

iTrader: (1)

^^^ Now you just need to start producing quality aftermarket components that are in demand. I would be your first customer believe me, i'd love to be able to get some parts from in Canada. Duty begins to become a killer after a while.

On that note, by any chance do you have any new S5 TII rotor housings?

perfect_circle

this is off of an old email i had from them that i forgot about, hope it helps

Christopher Campitelli, C.O.O.
CP RACING & DESIGNS
1440 Tottenham Rd
Tottenham, Ontario
L0G 1W0
905-936-5151
www.cpracing.ca

R.P.M.

iTrader: (3)

I can get you some S5 rotor housings from Mazda if you wanted...let me know and I'll pm you a price.

perfect_circle - thats an old shop address....they are no longer there anymore.

Dan_s_young

iTrader: (1)

If you could get me a price + intake and exhaust large streetports on the housings I'd really appreciate it!

guru

This is the number direct 905-595-1820 you may get a person you may get a machine, you will get a call back if you leave a message. Either way, if you have an issue regarding an old order(which we know many of you do) that has not been filled please call and we will do all we can to sort you out. We are not open for business to the general public at this time as some of you have already heard.

We understand many of you are angry, we would be also were roles reversed. Call pass on your information and you will get taken care of. We apologize for all the headaches.


CP