confused.. need help
07-07-05, 04:05 PM
#1
Slide Or Die
Thread Starter
iTrader: (3)
Join Date: May 2004
Location: Dayton, OH
Posts: 1,076
Likes: 0
Received 0 Likes
on
0 Posts
confused.. need help
i have mixed input on this.. can you swap a 13b from a gsl-se into an SA... what would i have to change? I have heard you cant do it.. and you can but the front mount is different.. please help me clear this up..
07-07-05, 04:29 PM
#2
Too old to act my age
Join Date: Feb 2005
Location: Tulsa, Ok.
Posts: 3,164
Likes: 0
Received 0 Likes
on
0 Posts
Front mount is different. This requires either modifying the one you have, or getting the GSL-SE engine mounting plate. The 13b is like 10mm longer than the 12a.
07-07-05, 04:33 PM
#4
Too old to act my age
Join Date: Feb 2005
Location: Tulsa, Ok.
Posts: 3,164
Likes: 0
Received 0 Likes
on
0 Posts
If you have a donar car, then you should have most everything needed, other than anything that needs replaced. Be sure to use the SE clutch and pressure plate, as they are about 10mm larger OD than the SA, otherwise, even the SA tranny should work fine.
Last edited by Rogue_Wulff; 07-07-05 at 04:36 PM.
Trending Topics
07-07-05, 06:03 PM
#8
Slide Or Die
Thread Starter
iTrader: (3)
Join Date: May 2004
Location: Dayton, OH
Posts: 1,076
Likes: 0
Received 0 Likes
on
0 Posts
well my SA is almost perfect.. and the donor car is about perfect.. but it has no title.. and i would have to pass echeck with it.. so i am gonna do the suspension swap.. and maybe the engine too.. after that its fair game..
Thread
Thread Starter
Forum
Replies
Last Post
efinigenie
3rd Generation Specific (1993-2002)
16
03-23-08 12:10 PM