Carb Rebuild Cost
#3
Lapping = Fapping
iTrader: (13)
I say do it yourself. Don't rush things. Reduce distractions. Lay everything out on a white flat surface. Grab a good quality flat tip and philips screwdrivers (#2 size). Needle nose pliers. 14mm wrench for the long center bolt on top. 12mm wrench for the jet cover bolt plugs on the side of each float bowl. Glasses, if you need them; there are a few small parts under the accel pump squirter nozzle. Take some pictures or draw a diagram. Take notes. Label things.
#5
Junior Member
Thread Starter
Join Date: Apr 2008
Location: West Chester, OH
Posts: 41
Likes: 0
Received 0 Likes
on
0 Posts
I say do it yourself. Don't rush things. Reduce distractions. Lay everything out on a white flat surface. Grab a good quality flat tip and philips screwdrivers (#2 size). Needle nose pliers. 14mm wrench for the long center bolt on top. 12mm wrench for the jet cover bolt plugs on the side of each float bowl. Glasses, if you need them; there are a few small parts under the accel pump squirter nozzle. Take some pictures or draw a diagram. Take notes. Label things.
Thread
Thread Starter
Forum
Replies
Last Post
Jeff20B
1st Generation Specific (1979-1985)
73
09-16-18 07:16 PM
Under PSI
3rd Generation Specific (1993-2002)
19
09-23-15 11:47 PM