79+80+84_rx-7

I took apart the carb, cleaned it all out........ and i took EVERYTHING off the main body..... well, **** me...

I went to put it back together and I cant figure where the hell all the jets and air bleeds go, anyone want to help me out?


I need a picture, with which numbers go where, ect,

Any help is appreciated...



Thanx, Laterz, Andrew

79+80+84_rx-7

Rx7carl

Oh man, you shoulda made a drawing first. I dont have it in a digital pic or anything but I can help you. E mail me or give me till tomorrow to find the drawing and snap a pic of it.

79+80+84_rx-7

thanks



or i can beg mario to come over and help...

mar3

iTrader: (8)

Andrew, the kit CAME with a great exploded view of the carb!! What the hell happened to that??

79+80+84_rx-7

I still got it



but it doesn 'splain 'bout da' damn' numbas......... cause there is two one size, and another two the other size.... so I dunno where teh **** they go.......



Wanna help? go take the top of your 84 carb off and make a drawing of all with the number, ect?



Thankz, Laterz, Andrew


BTW, where is that pic?

mar3

iTrader: (8)

Look at the drawing closely....I remember it showing the barrels/rods being different sizes...also, do a search, I vaguely remember posting my experiences rebuilding the '80 carb and where the different rods go...

The pic of the rebuild kit is still in the dx3600....

79+80+84_rx-7

sigh




****.... I already did a search and came up dry


hmmmmmm

it didnt show sizes.... just said what it was... and then there is the little ****, and its just all ******* confusing....


I give....

mar3

iTrader: (8)

The actual drawings in the exploded view show the different sizes if you look carefully at the drawing....that's what I'm getting at, not reading anything at all....looking at just the drawings of the ***** and rods CAREFULLY...

vipernicus42

iTrader: (4)

Yeah, I have an 84 nikki that unfortunately is in a million pieces because my godfather and I took it apart, but never put it back together. Ugh... He said that he'd do it the next day or the day after, that was 3 weeks ago and he hasn't touched it.

I wish someone with the know-how would do a nice big visual tutorial on the rebuild... The shop manual sucks majorly.

I would do it, if I had the help of someone who knew his stuff..

What I might do when I have the time is take a picture of each individual part, then play name-that-part with some experts on here... or "name that part and tell me which order to reassemble in!"... hehe.. I'd gladly do a big-huge visual tutorial for everybody with it.

So.. anyone from Ottawa know how to rebuild these?

Jon

jbcobra

I took a bunch of pictures of my 82's Nikki so I could get it back together when I rebuilt it. They're here if you want to take a look at them. There are three pages of pictures. Uses the arrows at the top to move from page to page. Hope this helps.

djmickyg

i once tried my hand at rebuilding a Nikki carb and **** was it hard.. i some how managed to get it all back but the linkages were all messed.

but lucky that carb was stuffed. i had it checked and the acc pump passages were blocked so now i have a nice "new" one..