1st Generation Specific (1979-1985) 1979-1985 Discussion including performance modifications and technical support sections

carb problem?

Thread Tools
 
Search this Thread
 
Old 11-15-05 | 12:21 PM
  #26  
psh you aint hip's Avatar
Thread Starter
Full Member

 
Joined: Jul 2005
Posts: 157
Likes: 0
From: ohio
your thinking the way i am but i pulled them and cleaned them and it runs the same and i think something is stiking beacuse when i hit the gas and let off it gose down but i have to pull the pedal back sooo it will close all tha way!!! but and way im happy with where it is but im not happy with the miss it has sooo any more input on this?
Old 11-15-05 | 04:33 PM
  #27  
psh you aint hip's Avatar
Thread Starter
Full Member

 
Joined: Jul 2005
Posts: 157
Likes: 0
From: ohio
ohhh and yea lll emisions is still there!!!
Old 11-15-05 | 06:31 PM
  #28  
FB II's Avatar
Banned. I got OWNED!!!
 
Joined: Dec 2002
Posts: 4,192
Likes: 0
From: wishing i was back in FL
OHHHHH shiiiiit, i think you have the throttle cable hooked to the wrong linkage. i've seen this plenty of times. if you can pull back on the gas pedal and it brings the idle down then yea, switch the cable to the next linkage over. see how that works
Old 11-16-05 | 07:53 AM
  #29  
psh you aint hip's Avatar
Thread Starter
Full Member

 
Joined: Jul 2005
Posts: 157
Likes: 0
From: ohio
ok i will try but im pretty sure its where it needs to be but i will give it a shot any thoughts on the miss it has? besides plugs?
Old 11-16-05 | 07:30 PM
  #30  
laundryhamperman's Avatar
Full Member
iTrader: (3)
 
Joined: May 2005
Posts: 173
Likes: 0
From: Pennsylvania
Just for information, my car used to backfire alot and the headers would glow bright red. An alternative to guessing that the cats are clogged is that the idle mixture is extrememly lean. That was the problem with my car, fast idle, red hot headers, and flames shooting out my tail pipe at night. ok ok, the flames were really cool, but its not healthy for the car.
Old 03-13-06 | 07:57 PM
  #31  
blwfly's Avatar
kiwi from downunder..
iTrader: (4)
 
Joined: Nov 2005
Posts: 3,423
Likes: 5
From: springfield,oregon
thought il just use an old thred

ok here it goes when i mange to get it to go it will idel for 2sec then die soo i screwed the idel screw right in thinkin this will keep the sucker goin well i had a little trouble but got it goin idled really fast for bout 5-10 seconds sounds like nothins wrong but everytime it just dies iv played with timing acell pump nut,mixture screw
i have everything for it to fun fuel,air,spark theres fuel comin from the jets

heres what i have 12a nikki,no emmisions,2gendf,jusr added a block off plate to the manifold im pretty sure its not leaking seeing vaccum leak causes higher revs guess thats not my problem

do you think i have somthin clogged inside the carb it was runing okay before i did the block off plate but not positive on that
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Jeff20B
1st Generation Specific (1979-1985)
73
09-16-18 07:16 PM
The1Sun
1st Generation Specific (1979-1985)
7
09-18-15 07:13 PM
The1Sun
New Member RX-7 Technical
5
09-15-15 04:45 PM
heywier427
Naturally Aspirated Performance Forum
2
09-11-15 04:49 PM



Quick Reply: carb problem?



All times are GMT -5. The time now is 02:15 AM.