car new to me and seems like its got a few problems...
#26
Full Member
Thread Starter
I followed the MazSpeed vacuum tutorial carefully and ran all new hoses and T's...my car did not have the 'purge valve' attached...So, I am to order one when I get home from this trip I'm on..
I did the work, air control valve block off plate and all, minus the purge valve set-up.(the #3,#4 vacuum pipes open)..fired the car and it start up and run with my foot on the gas, quit at idle tho...I quit for the night....tired.
the next morning I capped the #3 & #4 vacuum pipes (on the carb spacer) and she fired right up & ran pretty great! with a good idle. pulling strong on the secondary carb valves... I can feel them kick in now! the carburetor and the crankcase is not vented properly to that valve as well as those #3 & #4 vac outlet pipes...so thats next. as well as time for that new radiator.
Thanks
I did the work, air control valve block off plate and all, minus the purge valve set-up.(the #3,#4 vacuum pipes open)..fired the car and it start up and run with my foot on the gas, quit at idle tho...I quit for the night....tired.
the next morning I capped the #3 & #4 vacuum pipes (on the carb spacer) and she fired right up & ran pretty great! with a good idle. pulling strong on the secondary carb valves... I can feel them kick in now! the carburetor and the crankcase is not vented properly to that valve as well as those #3 & #4 vac outlet pipes...so thats next. as well as time for that new radiator.
Thanks
#27
Full Member
Thread Starter
been driving the Rx7 around...fun car. and having fun with it.. out of town now, since last week. home Fri, Sat, Sun..drove the car, fun.....on Monday I had to go back out of town to hospital....so, i'll be here for a few weeks, I'll keep Ya posted on the car when work resumes....(hope my battery doesn't die!) ...oh well, so goes the world, heh! I'll keep Ya posted on the Rx7...thx.
Thread
Thread Starter
Forum
Replies
Last Post
dburks10
3rd Generation Specific (1993-2002)
15
04-05-16 03:35 PM
zachkendall
New Member RX-7 Technical
2
03-29-16 01:14 PM