Calling it a night (sneek peek pics!)
Trending Topics
#16
Always waiting for parts!
iTrader: (2)
Nice setups for both cars... Good luck getting it finished Iotus. 13 hours- hell I have spent half that just tring to get out one stuborn bolt. At least it felt that way.
Directfreak-
Is that line to the Fuel Pressure regulater attached to the carb bonnet? I believe 680rwhp castrated me on that. he said you have to have that on the intake manifold so you dont flood your engine. Are you flooding between shifts?
Directfreak-
Is that line to the Fuel Pressure regulater attached to the carb bonnet? I believe 680rwhp castrated me on that. he said you have to have that on the intake manifold so you dont flood your engine. Are you flooding between shifts?
#18
I can has a Hemi? Yes...
iTrader: (2)
Originally posted by seanrot
Directfreak-
Is that line to the Fuel Pressure regulater attached to the carb bonnet?
Directfreak-
Is that line to the Fuel Pressure regulater attached to the carb bonnet?
Originally posted by 180sx-x
is that a non-intercooled still-carbed 12A engine i c? or do my eyes decieve me?
is that a non-intercooled still-carbed 12A engine i c? or do my eyes decieve me?
My Haltech was fried and I had to send it back to AUS. It will be a while before I get it back, and even longer before I can have it tuned. This way I can run it now (soon).
#19
I can has a Hemi? Yes...
iTrader: (2)
Originally posted by seanrot
Directfreak-
Is that line to the Fuel Pressure regulater attached to the carb bonnet? I believe 680rwhp castrated me on that.
Directfreak-
Is that line to the Fuel Pressure regulater attached to the carb bonnet? I believe 680rwhp castrated me on that.
I am making a new line to come off a "T" soon for that, so it can control the RRFPR and the Profec B.
There the line only sees boost and no vacuum. Why would I want my FPR to see vacuum?
If I need to change it, please tell me why.
#23
I can has a Hemi? Yes...
iTrader: (2)
Originally posted by hotty
its a really nice intercooler, but, is there a way you can make that not look so bent?
its a really nice intercooler, but, is there a way you can make that not look so bent?
This is only temporary, to get the car dialed in.
Last edited by Directfreak; 12-08-03 at 01:01 AM.