Randokuky

When i press the brake in it bogs the car down/dies (sometimes). What controls the RPMs coming back down to idel? after it bogd down to 500 or so some times it goes back up to 1,000 (i know it should be 750 but oh well) most the time it bogs down and dies.

dj55b

iTrader: (2)

try adjusting the idle screw ... Looking at the carb from the driver side, where the throttle cable and choke cable is, look under there and you will see a screw with a + head on there, you can use a long flat head to access it, turn it in about 1/2 a turn to the righ and see if that works, also you can try adjusting the mixture screw with is also on the same side, but its more towards the bottom middle of the carb

aussiesmg

iTrader: (1)

Does it surge and miss when you lift off the throttle or when holding a constant throttle.

Randokuky

I have tryed playing with the idel screw and it seems to help some. now witch way should the mixture screw be turned?

Randokuky

for about a sec then stops, kinda acts like its fuel starved, but i know its not. Checked that already.

aussiesmg

iTrader: (1)

do a search on "Shutter Valve" It might be related.