Best set of rims
#5
Originally Posted by Max7
Uhh......... the rims I have, jeesh that was easy.
#7
I would really like to see that
Originally Posted by Directfreak
I agree!! On My widebody I am probabaly gonna run some Konig Imagines' in 17x9's up front and 17x12's in the Rear - with a BIG FATT LIP!
Trending Topics
#8
what web said and these
16" old school enkei mesh, 15" epsilons, 15" work fins
15" epsilons (the non-reversed side)
and here's the reversed side
and the 15" work fins
gonna go fender flares some day so the car will look even better!
i'll have my enkei's posted in a few days.... or weeks if i don't get lazy
16" old school enkei mesh, 15" epsilons, 15" work fins
15" epsilons (the non-reversed side)
and here's the reversed side
and the 15" work fins
gonna go fender flares some day so the car will look even better!
i'll have my enkei's posted in a few days.... or weeks if i don't get lazy
#10
Originally Posted by jays83gsl
Enkei 92. Couldn't find a pic of ROH Snipers in time
Not sure what's up with Enkei's site but any time someone recommends one ofo their wheels it's not on there. Mmmgh.
#12
Old school Riken Mesh wheels black center with a polished lip. I think mesh wheels are the only wheels for 1st gen. RX-7s.
http://www.mazspeed.com/85%20RX7%20blk%20glass.jpg
http://www.mazspeed.com/85%20RX7%20sunset.jpg
http://www.mazspeed.com/85%20RX7%20blk%20glass.jpg
http://www.mazspeed.com/85%20RX7%20sunset.jpg
#17
Rotoholic Moderookie
iTrader: (4)
Joined: May 2002
Posts: 5,962
Likes: 33
From: Ottawa, Soviet Canuckistan
Originally Posted by calvinpaul
Directfreak, is that an intercooler in front of your radiator?
DF's pushin' like 300+hp to the rear wheels IIRC. He totally pwned a 350z in a vid he posted here.
I practically worship his car! It looks almost totally stock, but it can kick ROYAL BUTT!
Jon
#18
Originally Posted by calvinpaul
Directfreak, is that an intercooler in front of your radiator?
Don't mind the Roll bar either, it's just for... looks.
Most recent Dyno, still with the Holley, still pig rich.
385 rwhp and 333rwtq at 15 PSI.
More power and and torque, at less boost, on a MUCH hotter
day = better tune.
Haltech coming back in soon - finishing the Ford 8.8 rear soon.
#19
Aren't Riken one of the generic versions on my Enkei 92? For a while I thought I HAD Riken, because one of my centercaps says Riken on it. The inside of my rims say Enkei, though, so I'll trust them.
#22
http://image20.webshots.com/21/4/86/...2DQPUIx_ph.jpg
Click on the link. Those are my set of Enkei 92's they are for sale. 15x7, 4x110. camocarl@aol.com
Click on the link. Those are my set of Enkei 92's they are for sale. 15x7, 4x110. camocarl@aol.com
Last edited by camocarl; 11-21-04 at 11:13 PM.