Rotor Reaction

just put two 10in electric fans on,
temp. goes up after that....... it stays normal only when i cruise on highway.

was trying to adjust timing, but broke the bolt which on the leading side. half of the bolt is still on the engine front cover, inside the hole. how can i get it out??

any suggestion??

DONNA

i broke off the bleeder screw on rear brakes one year, had to drill a small hole in center of exposed broken bolt and then back it out with a reversed thread tap,,pretty simple job,,,not sure what its really called,,but hope u can fit a drill to where u can do the drilling ,might have to remove the radiator,,,good luck.......

DONNA

if there are enough exposed threads, u might can use vice grips..worth a try anyways,,,,,,,

MIKE-P-28

iTrader: (1)

Hopefully on the good side it wont be very tight. I know they make easy outs for stuff like that. Its a pain in the butt but good luck mate.

Rotor Reaction

thanks guys, but...
really bad luck..........><
the front cover cracked