anyone know where to buy a 26b?
#1
annabell
![](https://www.rx7club.com/images/misc/05_year_icon.png)
Thread Starter
Join Date: Apr 2005
Location: Cali
Posts: 398
Likes: 0
Received 0 Likes
on
0 Posts
anyone know where to buy a 26b?
ok before the flaming and and the telling to me that its rediculous, im just asking out of curiosity...if they are sold anywhere? as awsome as it would be to have a freakin quad rotor, i imagine itd be impossible, actually while on the topic does anyone know if anyone has ever put one into a street rx-7 whether it be 1st, 2nd, or 3rd gen.
#4
Leave my avatar alone!!!
![](https://www.rx7club.com/images/misc/15_year_icon.png)
iTrader: (8)
Join Date: Feb 2005
Location: Spartanburg SC
Posts: 1,656
Likes: 0
Received 0 Likes
on
0 Posts
I can get you a block asembled with all new parts nothing else inclooded for 15K. If you need a drop in motor just tell me what you need and I can get the price for you.
#5
Originally Posted by rotarycrazy
I can get you a block asembled with all new parts nothing else inclooded for 15K. If you need a drop in motor just tell me what you need and I can get the price for you.
do you have a rotary shop? if so, i might have to swing by there one day
Trending Topics
#12
annabell
![](https://www.rx7club.com/images/misc/05_year_icon.png)
Thread Starter
Join Date: Apr 2005
Location: Cali
Posts: 398
Likes: 0
Received 0 Likes
on
0 Posts
well at least now i know itd only be like a half a mil to put a quad rotor into my fb
that video was insane tho, oh and rotarycrazy ill keep you in mind when im done saving 500k
![rlaugh](https://www.rx7club.com/images/smilies/rollinglaugh.gif)
#14
hooly ****. damn thats one ****** fast rx. I was tryna read the numbers on da window. it looked like it was dailed for a 9.1 sumthin, but can't be sure. if you count the seconds from his start seems like somewhere around that. but damn that launch was hella quick. that has to be on slicks or like nitto555r's. would a 26b even fit in a first gen without hella modding?
#16
Quad rotor engine are just two 13B or 12A with a custom center and E-shaft. That red FD had two 12A engine . So it would be a 24A rotor engine...hehe... i hate the way they cut the hood for the intake. Some shops offer the custom E-shaft along with other custom pieces for it , one of them would be RE kiwi in NZ.
#18
Originally Posted by SomeGuy_sg
Quad rotor engine are just two 13B or 12A with a custom center and E-shaft. That red FD had two 12A engine . So it would be a 24A rotor engine...hehe... i hate the way they cut the hood for the intake. Some shops offer the custom E-shaft along with other custom pieces for it , one of them would be RE kiwi in NZ.
![rolleyes](https://www.rx7club.com/images/smilies/rolleyes.gif)
#19
Leave my avatar alone!!!
![](https://www.rx7club.com/images/misc/15_year_icon.png)
iTrader: (8)
Join Date: Feb 2005
Location: Spartanburg SC
Posts: 1,656
Likes: 0
Received 0 Likes
on
0 Posts
Actually that FD has 590 HP at 8500rpm on pump gas with 9.0/1 compresion it ran a 10.24 at almoust 160 mph. It has 4 ITB with 550CC primary and secondary injectors 2 oil pumps 2 bosh fuel pumps and a really big fuel cell.
#21
good thing im already at home
man id love to get my hands on a 26b, but thats a little to expensive for me at this time. i could take out a loan and get one. i would to do is sit there and look at it, and you better believe i would for the majority of my free time! maybe after i get finished with school and get a better job. another problem would be, what the heck am i going to put that damn thing in, a crown vic???
![Wink](https://www.rx7club.com/images/smilies/wink.gif)
Thread
Thread Starter
Forum
Replies
Last Post
SakeBomb Garage
Group Buy & Product Dev. FD RX-7
8
10-09-15 10:05 PM
mulcryant
2nd Generation Specific (1986-1992)
10
09-09-15 05:24 PM