ANybody want this rear wing?
#1
Senior Member
Thread Starter
Join Date: Mar 2003
Location: Morristown, TN
Posts: 532
Likes: 0
Received 0 Likes
on
0 Posts
ANybody want this rear wing?
I just happened to look over behind a garage the other day as I was driving by, and I saw this wrecked FB with this wing:
-it is a soft spoiler (can be squeezed). If anybody is interested, I will see what they want for it (if anything), and ship it at cost. I hate to see stuff like this go to waste.
peace
Bryan.
-it is a soft spoiler (can be squeezed). If anybody is interested, I will see what they want for it (if anything), and ship it at cost. I hate to see stuff like this go to waste.
peace
Bryan.
#3
Senior Member
Thread Starter
Join Date: Mar 2003
Location: Morristown, TN
Posts: 532
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by Keaponlaffen
that's fugly
no offense...
that's fugly
no offense...
and no offense taken.
Last edited by BRealistic; 04-16-03 at 05:21 PM.
#6
Senior Member
Thread Starter
Join Date: Mar 2003
Location: Morristown, TN
Posts: 532
Likes: 0
Received 0 Likes
on
0 Posts
Oh, and sorry about the blurred picture. I was on private property after the garage was closed, and I kept getting dirty looks from the neigbors. I am a big target.
Trending Topics
#8
Senior Member
Thread Starter
Join Date: Mar 2003
Location: Morristown, TN
Posts: 532
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by O 16581 72452 5
Yeah... wtf is up with your thumb?
Yeah... wtf is up with your thumb?
#9
Senior Member
Thread Starter
Join Date: Mar 2003
Location: Morristown, TN
Posts: 532
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by 81Rex6port13b
what rims are on that car?
i see a shinny lip. and black....
yea the wings not my tast either.
what rims are on that car?
i see a shinny lip. and black....
yea the wings not my tast either.
Well, I only looked at the driver's side. The front wheel was a standard cross rex mag wheel, and the one you see is a steel wheel with a white wall tire..
#11
MY NEW NAME IS ROTARY 7S
Join Date: Jun 2002
Location: Cell Block 4 (LOCKDOWN)
Posts: 1,323
Likes: 0
Received 0 Likes
on
0 Posts
What else is on there?
I need some working hatch struts..lol I havent had any over a year now..
I got tired of going to 5 diffrent stores in one day and thier books call for a model and when I get it to put on my car...its a totally diffrent design..
I need some working hatch struts..lol I havent had any over a year now..
I got tired of going to 5 diffrent stores in one day and thier books call for a model and when I get it to put on my car...its a totally diffrent design..
#13
Right near Malloy
iTrader: (28)
Join Date: Dec 1999
Location: Behind a workbench, repairing FC Electronics.
Posts: 7,847
Received 513 Likes
on
348 Posts
I'll bite, 22306...
Looks like there may be a bit more useful stuff on that car... Appears to be a 1984 or 1985... (Never can tell those apart without looking at the stickers under the hood or the VIN...)
See what else you can find on that car.
Looks like there may be a bit more useful stuff on that car... Appears to be a 1984 or 1985... (Never can tell those apart without looking at the stickers under the hood or the VIN...)
See what else you can find on that car.
#15
Senior Member
Thread Starter
Join Date: Mar 2003
Location: Morristown, TN
Posts: 532
Likes: 0
Received 0 Likes
on
0 Posts
????????????????????????????????????
Ok, I just went by there, since it is less than I mile from my main house. Dagnabbit!! Digital camera batteries die young.
Ok tell me what you want photos of.
I looked over car, and here is what I saw:
Has been hit on drivers front corner. Not bad, but pushed rad almost back into engine.
CAR= 144k mile 5 speed GS(84-85) black with grey interior and three rex cross mags and one black steel= two good mags with rough paint(niks) and one has curb rash. Tires shot but hold air.
Rad looked good, but had bondo on 2 inches of top part???
engine, trans. carb , rats nest stock and complete, but coils moved for some reason, and a/c compressor showed rust on belt pulley with no belt- probably bad. I might grab air pump since mine is making noises.
exterior- no skin good except metal sunroof and rear bumper- but both have bad paint but no rust. Sunroof has no headliner.
Rear hatch good and passenger rear triangle window good. Hatch struts hard to pull up, but hold hatch in place. Plastic piece between tails good, but I might grab this. Mirrors excellent. hmm, I might grab th.. oh well. Maybe not if somebody needs them. GS badge good.
interior- both grey buckets looked very good, with one small cig burn on driver's seat. dash good with no cracks. Console gone, stereo and surround gone. Instument bezel good. Storage bins cut-up for speakers. rear destructively removed to pull speakers. Door panels rough (good cloth, but bad viny and trim).. The only thing removed that seems essential is the steering wheel surround and switches.
whew. hope that helps.
Ok tell me what you want photos of.
I looked over car, and here is what I saw:
Has been hit on drivers front corner. Not bad, but pushed rad almost back into engine.
CAR= 144k mile 5 speed GS(84-85) black with grey interior and three rex cross mags and one black steel= two good mags with rough paint(niks) and one has curb rash. Tires shot but hold air.
Rad looked good, but had bondo on 2 inches of top part???
engine, trans. carb , rats nest stock and complete, but coils moved for some reason, and a/c compressor showed rust on belt pulley with no belt- probably bad. I might grab air pump since mine is making noises.
exterior- no skin good except metal sunroof and rear bumper- but both have bad paint but no rust. Sunroof has no headliner.
Rear hatch good and passenger rear triangle window good. Hatch struts hard to pull up, but hold hatch in place. Plastic piece between tails good, but I might grab this. Mirrors excellent. hmm, I might grab th.. oh well. Maybe not if somebody needs them. GS badge good.
interior- both grey buckets looked very good, with one small cig burn on driver's seat. dash good with no cracks. Console gone, stereo and surround gone. Instument bezel good. Storage bins cut-up for speakers. rear destructively removed to pull speakers. Door panels rough (good cloth, but bad viny and trim).. The only thing removed that seems essential is the steering wheel surround and switches.
whew. hope that helps.
#17
FD > FB > FC
Originally posted by O 16581 72452 5
Yeah... wtf is up with your thumb?
Yeah... wtf is up with your thumb?
#18
Right near Malloy
iTrader: (28)
Join Date: Dec 1999
Location: Behind a workbench, repairing FC Electronics.
Posts: 7,847
Received 513 Likes
on
348 Posts
Is the interior a light grey, or a charcoalish color? I wanna replace my maroon dash with black or dark grey.
What do they want for it, and are they open Saturdays? I might make a day trip out of it, if it's worth it.
What do they want for it, and are they open Saturdays? I might make a day trip out of it, if it's worth it.
#21
Senior Member
Thread Starter
Join Date: Mar 2003
Location: Morristown, TN
Posts: 532
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by Cody
Have you been breaking in this car on someone's property? Sounds like nobody is there when you are opening it up.... : X
Have you been breaking in this car on someone's property? Sounds like nobody is there when you are opening it up.... : X
Dude, the area the FB is in is just 100 feet from the road, and it has no fence or signs to discourage visitors. I am NO thief.
#22
add to cart
Join Date: Jun 2002
Location: Saskatoon, SK & Montreal, PQ
Posts: 4,180
Likes: 0
Received 0 Likes
on
0 Posts
The thumb thing: He's just double-jointed. Both my middle and base thumb knuckle bend that way, as do my base finger joints. When my sargeant used me as a demo to teach judo finger-locks, he had to give up in frustration.
#24
Full Member
Join Date: Jun 2002
Location: Hattiesburg, MS
Posts: 76
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by SoRRoW
What else is on there?
I need some working hatch struts..lol I havent had any over a year now..
I got tired of going to 5 diffrent stores in one day and thier books call for a model and when I get it to put on my car...its a totally diffrent design..
What else is on there?
I need some working hatch struts..lol I havent had any over a year now..
I got tired of going to 5 diffrent stores in one day and thier books call for a model and when I get it to put on my car...its a totally diffrent design..
#25
Heh, I just found out yesterday that I live 30 mins from Victoria British and work about 10 mins from there.
Gonna stop by the counter today and get a magazine and maybe some struts.
I'm still very interested in the spoiler though.
Joe
Gonna stop by the counter today and get a magazine and maybe some struts.
I'm still very interested in the spoiler though.
Joe