1st Generation Specific (1979-1985) 1979-1985 Discussion including performance modifications and technical support sections

Aftermarket stereo help

Thread Tools
 
Search this Thread
 
Old 04-11-05, 08:38 PM
  #1  
SoCal STi Hitman

Thread Starter
 
Cowboyfun's Avatar
 
Join Date: Mar 2005
Location: In a paint booth
Posts: 880
Likes: 0
Received 0 Likes on 0 Posts
Aftermarket stereo help

Ok forgive me but i posted this in 2 places to get a better repsonse.
Ok, I have an 83 GSL

pulled the stock head unit, speakers and amps. Re-ran speaker wiring through stock locations, and pluged it all into the harness that came with the new head unit using quick connects since they did not have a mazda harness. Anyways, the problem is that I can't get the damn thing to turn on, I put connectors on the red and yellow wires (accessory and battey, respectively) and then ran the ground wire to a bolt going to the floor on the center console. I plugged the red and yellow wires into the original harness (car side) according to what the wiring diagram showed as being the battery, and the accessory, and then left the remote antenna wire disconnected (have a solid antenna). After I had it all plugged in I turned the car on, and voila-NOTHING. I plugged the old head unit in to the wiring harness again and it failed to turn on. Could this be bad wiring or a blown fuse? The old head unit workd but fails to work now, does anyone have any ideas? Thanks in advance
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
renjiv2
3rd Generation Specific (1993-2002)
57
01-25-24 03:34 AM
TeamRuffRacing
Adaptronic Engine Mgmt - AUS
1
09-30-15 08:13 PM



Quick Reply: Aftermarket stereo help



All times are GMT -5. The time now is 05:57 AM.