aftermarket gauges
12-20-01 | 03:58 PM
#1
Thread Starter
smog nazi destroyer
Joined: Jul 2001
Posts: 1,681
Likes: 1
From: california
aftermarket gauges
i am thinking about picking up a few gauges, and woundering what i should get, and what type.
i was looking into getting three. one oil pressure guage, possible one egt, but not sure about the third. any suggestins?
i was looking into getting three. one oil pressure guage, possible one egt, but not sure about the third. any suggestins?
12-20-01 | 10:09 PM
#3
I have Autometer Oil Pressure Gauge It works really well, and moves Just as quick as the Rpm Gauge, I also have the Autometer A/F.... It doesn't always see to work but it looks nice once it does work
You can see them here
You can see them here
12-20-01 | 10:20 PM
#4
I have all Auto Meter, they have saved my motor twice now.
A/F, oil temp, oil pressure, water temp.
An EGT re-acts fairly slow. So if you want it for tunning, you are better off getting an A/F gauge.
Ryan
A/F, oil temp, oil pressure, water temp.
An EGT re-acts fairly slow. So if you want it for tunning, you are better off getting an A/F gauge.
Ryan
12-20-01 | 11:02 PM
#5
10.32 @ 133
Joined: Mar 2001
Posts: 1,362
Likes: 0
From: Sydney, Australia
I have Omori gauges in my car.
www.omorimeter.co.jp
www.omorimeter.com
I got my EGT gauge from Omori Meter.com and they were cheaper than the Australian importer!
http://www.ajc13b.com/current_7.htm
I have pics of the gauges on that page.
www.omorimeter.co.jp
www.omorimeter.com
I got my EGT gauge from Omori Meter.com and they were cheaper than the Australian importer!
http://www.ajc13b.com/current_7.htm
I have pics of the gauges on that page.
12-21-01 | 06:05 AM
#6
Your Opinion is Wrong
Joined: Feb 2001
Posts: 591
Likes: 0
From: Peoples Republic of California
A/F guages are worthless. Its you really feel the need to measure your a/f based on a narrow band o2 sensor, just wire a volt meter dirrectly to it and skip the fancy, yet useless, light show. The range of most guages just its enough to be worth while.
just remember jon, anything like oil/fuel pressure is going to have to be electric or mouted outside the car.
just remember jon, anything like oil/fuel pressure is going to have to be electric or mouted outside the car.
Trending Topics
12-21-01 | 12:14 PM
#9
Right near Malloy
iTrader: (28)
Joined: Dec 1999
Posts: 7,847
Likes: 513
From: Behind a workbench, repairing FC Electronics.
Originally posted by Dyre
just remember jon, anything like oil/fuel pressure is going to have to be electric or mouted outside the car.
just remember jon, anything like oil/fuel pressure is going to have to be electric or mouted outside the car.
Electrics please.Who has the best bang for the buck gauges? I've heard Autometer is cheap stuff.
12-21-01 | 02:32 PM
#10
Full Member
Joined: Jul 2001
Posts: 58
Likes: 0
From: MI
Bang-for-buck: Definatly Westach (http://www.aircraft-spruce.com )
12-21-01 | 03:44 PM
#11
The AUTO DOCTOR
Joined: Mar 2001
Posts: 1,952
Likes: 0
From: South Side of ATL. Ga.
they kick ***, they are only a few miles from me and got all kinda cool stuff 
12-22-01 | 05:42 PM
#13
10.32 @ 133
Joined: Mar 2001
Posts: 1,362
Likes: 0
From: Sydney, Australia
Originally posted by Dyre
BTW: AJC13B, how much do those guages cost, roughly... becuase those kickass compared to the Defi guages i was thinking about getting.
BTW: AJC13B, how much do those guages cost, roughly... becuase those kickass compared to the Defi guages i was thinking about getting.
Thread
Thread Starter
Forum
Replies
Last Post
24seven_dada
3rd Generation Specific (1993-2002)
20
11-10-18 12:03 PM
t-von
3rd Generation Specific (1993-2002)
9
09-10-15 01:56 PM
The1Sun
1st Generation Specific (1979-1985)
0
09-07-15 10:21 PM