9.92 All Motor!!!
#26
Banned. I got OWNED!!!
one question......how do you make 500rwhp all motor? to get a 2,200 pound car to go 132mph it has to make that much power.....i dont know how its possible with a 13b !! im in shock! our 13b p-port with open exhaust made 250 rwhp and that was with a 58mm carb!!!where could 250 hp be hiding?!!
#27
Banned. I got OWNED!!!
"one question......how do you make 500rwhp all motor? to get a 2,200 pound car to go 132mph it has to make that much power....."
Its done with a 91 Per-Port , Microtech , throttle body, Gun-drilled axles, Mark williams 9 inch diff, g-force tranny..i think..... Jesus P has more experiance and years with rotary engines than 98% of rx7club members.
( 680RWHP12A )
There is a real misunderstanding of how drag racing works on this board..Everybody is so inclined to find horsepower to make their car go fast..sometimes its not just horsepower that makes rotarys go
More important is what we call in spanish Combinacion or in english Combination. Also 60-330ft and 8th mile times.
Padilla knows tranny gearing, rear-end gearing, weigth transfer, tourq curves in relation to gearing etc..and those things are not ordered from summit..they come from experience
Its done with a 91 Per-Port , Microtech , throttle body, Gun-drilled axles, Mark williams 9 inch diff, g-force tranny..i think..... Jesus P has more experiance and years with rotary engines than 98% of rx7club members.
( 680RWHP12A )
There is a real misunderstanding of how drag racing works on this board..Everybody is so inclined to find horsepower to make their car go fast..sometimes its not just horsepower that makes rotarys go
More important is what we call in spanish Combinacion or in english Combination. Also 60-330ft and 8th mile times.
Padilla knows tranny gearing, rear-end gearing, weigth transfer, tourq curves in relation to gearing etc..and those things are not ordered from summit..they come from experience
#29
This IS a tasty burger!
Join Date: Aug 2003
Location: Nashville, TN
Posts: 403
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by 680RWHP12A
bottom line is to go 132mph it HAS to be making 500 rwhp!!
bottom line is to go 132mph it HAS to be making 500 rwhp!!
#30
Banned. I got OWNED!!!
Originally posted by riofrio
Where did you get this from anyway? It doesn't sound right to me. Not trying to disagree, just curious.
Where did you get this from anyway? It doesn't sound right to me. Not trying to disagree, just curious.
www.prestage.com
#31
Banned. I got OWNED!!!
hmm i just checked again and it gave me 450
using the hp from et and weight
you guys might like that sight , some interesting info up there
#32
Banned. I got OWNED!!!
400 hp is the area.... but I have some doubts on this (www.prestige.com) formula..
For instance FLaco racing just ran 6.8 with a 1.09 60ft..
Bam-bam Racing miata from Puerto Rico runs 1.1 60ft but at 8.55 ET.
Flaco is turbo ...bam-bam is P-P + gene berg 58mm with a fogger setup.. ..so then a properly geared car with the a good launch can see simmilar 60-330 ft times and close 8th mile times thus one having 500+ more horsepower than the other....
I understand that theis websites formulas are based on math+physics but et #s don’t lie!
For instance FLaco racing just ran 6.8 with a 1.09 60ft..
Bam-bam Racing miata from Puerto Rico runs 1.1 60ft but at 8.55 ET.
Flaco is turbo ...bam-bam is P-P + gene berg 58mm with a fogger setup.. ..so then a properly geared car with the a good launch can see simmilar 60-330 ft times and close 8th mile times thus one having 500+ more horsepower than the other....
I understand that theis websites formulas are based on math+physics but et #s don’t lie!
#37
Uchinanchu
Join Date: Sep 2002
Location: Orlando, FL
Posts: 937
Likes: 0
Received 0 Likes
on
0 Posts
I don't think kilo really worries or even cares about what his car dyno's at. I think the only thing that him and most people I know down in the Orlando/Kissemee area are concerned with is what makes their car go down that 1/4 mile faster.
#38
Interstate Chop Shop CEO
Join Date: Mar 2002
Location: Running an Interstate Chop Shop
Posts: 1,110
Likes: 0
Received 1 Like
on
1 Post
Originally posted by 85rotarypower
I bet he could make that engine faster too. He just wants to keep it a little slower so that they don't ban the 13B. If this keeps up, he won't even be able to run a rotary. I see in the future rotaries being totally banned from all sportsman drag racing. I bet with a good 20B, he could go into the high 7's with that car. If he's doing high 9's with a 13B, then the 20B would be FAST! Rotaries are already banned from some classes. Not sure which ones, but there are a few. I think one might be Pro Outlaw RWD. They can use turbos in that class, and a 20B PPort with a big single turbo would do easy low 7's.
I bet he could make that engine faster too. He just wants to keep it a little slower so that they don't ban the 13B. If this keeps up, he won't even be able to run a rotary. I see in the future rotaries being totally banned from all sportsman drag racing. I bet with a good 20B, he could go into the high 7's with that car. If he's doing high 9's with a 13B, then the 20B would be FAST! Rotaries are already banned from some classes. Not sure which ones, but there are a few. I think one might be Pro Outlaw RWD. They can use turbos in that class, and a 20B PPort with a big single turbo would do easy low 7's.
#39
#40
Old [Sch|F]ool
Originally posted by 680RWHP12A
one question......how do you make 500rwhp all motor? to get a 2,200 pound car to go 132mph it has to make that much power.....i dont know how its possible with a 13b !! im in shock! our 13b p-port with open exhaust made 250 rwhp and that was with a 58mm carb!!!where could 250 hp be hiding?!!
one question......how do you make 500rwhp all motor? to get a 2,200 pound car to go 132mph it has to make that much power.....i dont know how its possible with a 13b !! im in shock! our 13b p-port with open exhaust made 250 rwhp and that was with a 58mm carb!!!where could 250 hp be hiding?!!
The HP calculators out there measure FLYWHEEL hp not WHEEL hp. Chrysler engineers came up with the formula in the 50's or 60's and they didn't care about wheel HP. Anyway, the formula starts to lose accuracy (reads optimistic) as you get into things like good slicks and launches (which is why ET is more than MPH) and when you get into things like full race trannies with close ratios and no-lift clutchless shifting (does he have one of those drag trannies, or is it a generic dogbox?).
SO I see it as fully believable.
#41
Senior Member
Join Date: Feb 2003
Location: Montreal, Qc, Canada
Posts: 275
Likes: 0
Received 0 Likes
on
0 Posts
from the searches ive made, Jesus 20b pp 3 barrel weber powered car was making somewhere arround 475hp
a pp 13b *could* make 380-400 if its purpose was to make 6 runs then get rebuilt.
this Padilla have serious skills.
a pp 13b *could* make 380-400 if its purpose was to make 6 runs then get rebuilt.
this Padilla have serious skills.
Thread
Thread Starter
Forum
Replies
Last Post