84gsl Won't Start
#1
Newbie
Thread Starter
Join Date: Nov 2003
Location: txs
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
84gsl Won't Start
Need a little help, I let my 84GSL with a 12A sit for about a month. I went to start yesterday with the choke out, but the engine only turned but never start. Also I never noticed this before when I would try to start it. But the tech needle would bounce up and down when I tried to start it, could this be a sign for why it won't start.
Thanks for the help.
Thanks for the help.
#2
Rotary Enthusiast
Join Date: Jun 2002
Location: Yokosuka
Posts: 1,058
Likes: 0
Received 0 Likes
on
0 Posts
I'm betting your motor has low compression. It happens when you let motors with low compression sit for awhile. It'll start, but with some effort.
https://www.rx7club.com/showthread.p...hreadid=162062
Check there for more detailed info...
Tach bouncing on startup is normal. The engine is rotating afterall...
https://www.rx7club.com/showthread.p...hreadid=162062
Check there for more detailed info...
Tach bouncing on startup is normal. The engine is rotating afterall...
#3
Right near Malloy
iTrader: (28)
Join Date: Dec 1999
Location: Behind a workbench, repairing FC Electronics.
Posts: 7,847
Received 512 Likes
on
347 Posts
Originally posted by jayroc
I'm betting your motor has low compression. It happens when you let motors with low compression sit for awhile. It'll start, but with some effort.
https://www.rx7club.com/showthread.p...hreadid=162062
Check there for more detailed info...
Tach bouncing on startup is normal. The engine is rotating afterall...
I'm betting your motor has low compression. It happens when you let motors with low compression sit for awhile. It'll start, but with some effort.
https://www.rx7club.com/showthread.p...hreadid=162062
Check there for more detailed info...
Tach bouncing on startup is normal. The engine is rotating afterall...
Thread
Thread Starter
Forum
Replies
Last Post
trickster
2nd Generation Specific (1986-1992)
25
07-01-23 04:40 PM