83 gs dying after choke
#26
Round and Round
iTrader: (10)
Replace the stock manifold and all cats with a bolt on Racing Beat header and pre-silencer. $400+ http://racingbeat.com/FRmazda1.htm
or
Keep the stock manifold and just replace all the cats with a Bonez race pipe from Rotary Performance. $75 http://www.rx7.com/store/rx7/saexhaust.html
Rotary Performance also has replacement cats, if you want to go that route.
or
Keep the stock manifold and just replace all the cats with a Bonez race pipe from Rotary Performance. $75 http://www.rx7.com/store/rx7/saexhaust.html
Rotary Performance also has replacement cats, if you want to go that route.
#27
Senior Member
Thread Starter
iTrader: (-1)
Join Date: May 2006
Location: hamilton ohio
Posts: 265
Likes: 0
Received 0 Likes
on
0 Posts
are the studs in the stock manifold removable because the nuts where so badly rusted they snapped off so if they arent removable i dont think i will be able to go that route..
#28
RAWR
iTrader: (3)
Check this hose.
https://www.rx7club.com/1st-generation-specific-1979-1985-18/hose-question-750125/
Like trochoid said replace master and slave with new or rebuild and you'll be doing it again soon. I like Tokico brand. Thats what Mazdatrix sends.
https://www.rx7club.com/1st-generation-specific-1979-1985-18/hose-question-750125/
Like trochoid said replace master and slave with new or rebuild and you'll be doing it again soon. I like Tokico brand. Thats what Mazdatrix sends.
#29
RAWR
iTrader: (3)
They should be removable with a drill and bit. I'd say fire up the car w/o the cats on (it will be loud as hell, i ran mine with an uncollected RB header and nothing else in my Grandpa's barn and it was one of the loudest things i've ever heard) to see if the car runs well without the cats on. If so, the cats are your problem. You have all winter to get this thing up and running, so don't rush things. Your progress looks really good.
#30
Senior Member
Thread Starter
iTrader: (-1)
Join Date: May 2006
Location: hamilton ohio
Posts: 265
Likes: 0
Received 0 Likes
on
0 Posts
well its a project believe that. looks like the people before me just let it go.. there where pencils yes i said pencils and bolts shoved in vac lines.. everytime i solve one problem i find another
#31
Senior Member
Thread Starter
iTrader: (-1)
Join Date: May 2006
Location: hamilton ohio
Posts: 265
Likes: 0
Received 0 Likes
on
0 Posts
ok i disconnected the pipe from the header to make sure it had more breathing room and well i still im dying after running for a few.. the choke dont even have the time too kick off. once it gets too about 1500 it just falls from there.. wish i had a way to make a video to show you guys whats goin on..
#32
Senior Member
Thread Starter
iTrader: (-1)
Join Date: May 2006
Location: hamilton ohio
Posts: 265
Likes: 0
Received 0 Likes
on
0 Posts
74rx4 can you please link me too the mazspeed (mods made simple book thing) the whole thing preferably i need the rats nest removal but would like to check out the rest of it also!
Thread
Thread Starter
Forum
Replies
Last Post
Turblown
Vendor Classifieds
12
10-17-20 03:25 PM