1979/80 special edition and 1983 GSL.
Trending Topics
#8
Burning Oil-Grinding 3rd
Originally Posted by White 87 13B
Why did you do that?! I needed answers...and now I am stuck with a problem...
Oh Yea. + 1.
#9
Senior Member
Join Date: May 2004
Location: New Mexico
Posts: 265
Likes: 0
Received 0 Likes
on
0 Posts
I posted a long thread asking about a tranny swap...but there was no reply and the site was down last time I checked...so I did the swap and it didn't work...I will spend all next weekend on it all over again!
#10
Burning Oil-Grinding 3rd
Originally Posted by White 87 13B
I posted a long thread asking about a tranny swap...but there was no reply and the site was down last time I checked...so I did the swap and it didn't work...I will spend all next weekend on it all over again!
By the Way The 79 and 80 have a different size Flywheel and Clutch from the 83, and a different Tail Shaft and Shifter. If that was your question.
#11
Senior Member
Join Date: May 2004
Location: New Mexico
Posts: 265
Likes: 0
Received 0 Likes
on
0 Posts
Okay...So, should I take the gears out of the 79 and put them in the 83? The 83 transmission is shot...the 79 is in damn good shape...So, um...is that possible of should we just get a rebuild kit for the transmission?!
#12
Burning Oil-Grinding 3rd
there is a write up somewhere on here on how to switch the tail sections between the two trans. If you were closer I would trade you it for one from an 83.
The basics is that you pull the tail section, Mod or change a roll pin and change a shaft.
The basics is that you pull the tail section, Mod or change a roll pin and change a shaft.
Thread
Thread Starter
Forum
Replies
Last Post
renjiv2
3rd Generation Specific (1993-2002)
57
01-25-24 03:34 AM