12a Rebuild ?
#28
Senior Member
Join Date: Sep 2003
Location: KY
Posts: 376
Likes: 0
Received 0 Likes
on
0 Posts
http://www.mazdatrix.com/faq/sidehsgs.htm
check this link out for some of the things to look for. This is for side housings.
check this link out for some of the things to look for. This is for side housings.
#30
Senior Member
Join Date: Sep 2003
Location: KY
Posts: 376
Likes: 0
Received 0 Likes
on
0 Posts
Although I haven't rebuilt an engine, the info I have found on doing it tells me it is best to inspect everything very closely. It seems the slightest crack or part out of tolerance can be like flushing $ down the toilet.
#31
Full Member
Thread Starter
Join Date: Jul 2003
Location: NC
Posts: 88
Likes: 0
Received 0 Likes
on
0 Posts
Ok guys, thanks for all the information and I found the problem with this engine. I removed the front housing and found that the interior and exterior sealing rubbers are damaged. There are approximately a 1/4" space that did not have any seal at all on the internal side of the front rotor housing. No question, this is the source of the anti-freeze leak.
The good news is that the rotors, housings and apex seals are in perfect condition.
The good news is that the rotors, housings and apex seals are in perfect condition.
Thread
Thread Starter
Forum
Replies
Last Post