0 emission 12a: needs and no needs
06-23-06, 10:40 PM
#1
Rotary Freakazoid
Thread Starter
iTrader: (1)
Join Date: May 2006
Location: Holland, Michigan/ Afganistan/ Iraq/ Itatly
Posts: 715
Likes: 0
Received 0 Likes
on
0 Posts
0 emission 12a: needs and no needs
ive got a new 12a and i dont want anything but the motor and needed pullys of course. the intake has a switch plate i made to fit a rochester carb on it. also i removed the intake butterly and welded it sealed. let me know what you guys think about the emissions on the stock carb and what i need and dont need.
06-23-06, 11:20 PM
#3
Rotary Freakazoid
Thread Starter
iTrader: (1)
Join Date: May 2006
Location: Holland, Michigan/ Afganistan/ Iraq/ Itatly
Posts: 715
Likes: 0
Received 0 Likes
on
0 Posts
how about all the vacume and that on the stock carb can that all go i would like to get the original carb back on but stripped down to bare
06-24-06, 09:39 AM
#5
wheres the water goin?
iTrader: (9)
Join Date: May 2005
Location: Nor Cal
Posts: 1,586
Likes: 0
Received 0 Likes
on
0 Posts
you can get your carb modded by sterling theres a small waiting list though. not only will he remove most of the emission **** it will also flow over 400 cfm
http://www.sterlingmetalworks.com/
heres the link they are in the process of redoing the site but he should be on here also if you need to talk to him about it!
http://www.sterlingmetalworks.com/
heres the link they are in the process of redoing the site but he should be on here also if you need to talk to him about it!
Thread
Thread Starter
Forum
Replies
Last Post
ls1swap
3rd Generation Specific (1993-2002)
17
06-03-24 03:25 PM
Snook
3rd Generation Specific (1993-2002)
17
02-27-21 02:54 PM
