*PICS* 91 NA engine streetport for 85 GSL
#1
Senior Member
Thread Starter
Join Date: Jan 2004
Location: Pittsburgh/Johnstown, PA
Posts: 476
Likes: 0
Received 0 Likes
on
0 Posts
*PICS* 91 NA engine streetport for 85 GSL
Started on the ports today. Should finish them up tonight. Enjoy and feel free to comment on them.
http://community.webshots.com/album/527175054lXOfxX
http://community.webshots.com/album/527175054lXOfxX
#4
Senior Member
Thread Starter
Join Date: Jan 2004
Location: Pittsburgh/Johnstown, PA
Posts: 476
Likes: 0
Received 0 Likes
on
0 Posts
180-200 RWHP hopefully. The auxiliaries will be worked on a little more once I get the sleeve inserts from Pineapple Racing and I will have just about every bolt-on mod short of a turbo.
Trending Topics
#11
Senior Member
Thread Starter
Join Date: Jan 2004
Location: Pittsburgh/Johnstown, PA
Posts: 476
Likes: 0
Received 0 Likes
on
0 Posts
These are the Blastin Custom templates. I pretty much made my own design. If there is some interest I will consider making templates of my design. I will be running the car on a dyno this spring so we shall find out how much power the ports are good for.
I will be using the S5 manifolds and Megasquirt. I am keeping the sleeve acutators and the VDI and using Megasquirt to control fuel, spark, aux ports, and the VDI.
I will be using the S5 manifolds and Megasquirt. I am keeping the sleeve acutators and the VDI and using Megasquirt to control fuel, spark, aux ports, and the VDI.
#12
Senior Member
Thread Starter
Join Date: Jan 2004
Location: Pittsburgh/Johnstown, PA
Posts: 476
Likes: 0
Received 0 Likes
on
0 Posts
Just put up some pictures of the exhaust ports. The ports were a bit bigger than I would have liked not to mention being uneven and poorly shaped but they were already done when I got the housings. The housings are otherwise in good shape and were free so I will make the ports work. The only thing I have done is to reshape one of the ports out and even it up. I have posted a couple of pictures. I will do the other one tomorrow. I also plan on polishing them both out nicely and putting a slightly larger bevel on the tops of the ports. Should make for a high RPM engine but will use up fuel quite a bit.
Thread
Thread Starter
Forum
Replies
Last Post