What did you do to your FB today?
#5001
Man I like the way that thing looks.
What did I do to mine today? Well, I finally finished building shelves in the garage (been working on and off on those the last two weeks) so I can get a bunch of stuff that didn't fit in the new shed out of the floor, thereby making room for projects like replacing the blown engine in the '79. Also, in the process, moved around the S5 13B that I hope I can free up and use in the FrankenRex.
#5002
Lapping = Fapping
iTrader: (13)
Originally Posted by dougingraham
In the first photo you can see the cracks in the 2 and 4 o'clock positions.
#5003
'85 12a
iTrader: (10)
The Borla tipped RB long primary exhaust is now a reality. Noticeably louder, bit not quite obnoxiously so. That is, until the secondaries open! And a deeper rumble off throttle. I'll need a road trip to really decide, but as of now, it's pretty sweet. My 5 Year old approves. He was laughing hysterically.
#5006
Lolicon*** of RX-7 World
bought stuff to get ready and finish my tune up on my nice little FB. just waiting on hoses to come on in and everything should be perfect.
Still need Bushings and Shocks
and she will be highway ready!~
Still need Bushings and Shocks
and she will be highway ready!~
#5007
Rotary Onigiri
iTrader: (9)
He hasn't listed any in awhile, but you might want to contact him and see if he is planning on selling any more. I suspect, given his location, he's having them made in Mexico and shipping them from San Diego. It took about 3 weeks from when I ordered them. Would have liked them a little sooner, but they arrived and were exactly what I needed.
One thing to think about though...these fit perfectly over my body kit with some minor notching of the flares. Without the body kit (side skirts), they may need a little more work to fit the contour of the body. But I suspect fussing with them will be minimal, especially when compared with ZG flares.
What did I do to mine today? Well, I finally finished building shelves in the garage (been working on and off on those the last two weeks) so I can get a bunch of stuff that didn't fit in the new shed out of the floor, thereby making room for projects like replacing the blown engine in the '79. Also, in the process, moved around the S5 13B that I hope I can free up and use in the FrankenRex.
d
#5008
Rotary Onigiri
iTrader: (9)
Today I dry-iced the backs of my door panels and chipped off the gooey stuff left over from the dynamat stuff that the PO used to recover the door panels. They're clean enough now that I can work with the panels without getting goo all over my fingers. Tomorrow I'll start the recovering process.
Yesterday I paid for a set of used Hoosiers to put on the SSR MkIIIs...they should arrive sometime next week.
fm
Yesterday I paid for a set of used Hoosiers to put on the SSR MkIIIs...they should arrive sometime next week.
fm
#5010
took the OG leather seats out of the FB, cleaned the carpets and wired in relays for the power windows. much faster! also, wired in a fused circuit missing since I've had the car - the damned alternator to battery wire! 14.7 @ alt was only getting 12.6-7 @ battery. coils barely seeing over 12v. so much of a drop at the factory wh/red wire that it was only 14.1 when it disappeared into the harness bundle by the shock tower. installed new lift struts for the rear glass. wiper and squirter still not functional, gotta trace it back.
in my struggles of fighting a bad TFIDLIS with clandestine parts, went back to fresh stock parts and it's happy now. still wont pull worth a damn past 4k rpm. don't think the timing is advancing, as crimping off the line, disconnecting it, or leaving the open line free, does anything to idle quality, rpm. can't figure it out. didn't add a gasket to base when rebuilding and stripping the carb, but no serious vacuum leaks noticed. just falls on its face at 4k. great bottom end despite a pacesetter and free flowing 2 1/4" exhaust. will diagnose dizzy parts with a vacuum pump/gauge to see if the diaphragms are blown. just another day in the life of an FB owner!
in my struggles of fighting a bad TFIDLIS with clandestine parts, went back to fresh stock parts and it's happy now. still wont pull worth a damn past 4k rpm. don't think the timing is advancing, as crimping off the line, disconnecting it, or leaving the open line free, does anything to idle quality, rpm. can't figure it out. didn't add a gasket to base when rebuilding and stripping the carb, but no serious vacuum leaks noticed. just falls on its face at 4k. great bottom end despite a pacesetter and free flowing 2 1/4" exhaust. will diagnose dizzy parts with a vacuum pump/gauge to see if the diaphragms are blown. just another day in the life of an FB owner!
#5012
timing was right on the marks before, but will check again. seems to have a "rubber band" effect holding the engine back. too many mods at once! I can feel the mechanical secondaries open up, but it loses steam past 4k rpms.
#5013
'84 5-letter
iTrader: (5)
Looks like I've blown my oil seals. She smokes and drinks. Like 4qts a week!
Not sure what caused this, but my suspicion is an accidental redline soon after I got her running on the Megasquirt.
Time to pull the motor and have it rebuilt. Nothing is coming easy on this project!!
Not sure what caused this, but my suspicion is an accidental redline soon after I got her running on the Megasquirt.
Time to pull the motor and have it rebuilt. Nothing is coming easy on this project!!
#5014
Moderator
iTrader: (3)
Join Date: Mar 2001
Location: https://www2.mazda.com/en/100th/
Posts: 31,119
Received 2,786 Likes
on
1,972 Posts
the mechanical advance in the distributor is different from the mechanical secondaries in the carb
#5019
I bought them off eBay from a user in So Cal named "ontheroad_93". Here's one of his completed auctions.
He hasn't listed any in awhile, but you might want to contact him and see if he is planning on selling any more. I suspect, given his location, he's having them made in Mexico and shipping them from San Diego. It took about 3 weeks from when I ordered them. Would have liked them a little sooner, but they arrived and were exactly what I needed.
One thing to think about though...these fit perfectly over my body kit with some minor notching of the flares. Without the body kit (side skirts), they may need a little more work to fit the contour of the body. But I suspect fussing with them will be minimal, especially when compared with ZG flares.
He hasn't listed any in awhile, but you might want to contact him and see if he is planning on selling any more. I suspect, given his location, he's having them made in Mexico and shipping them from San Diego. It took about 3 weeks from when I ordered them. Would have liked them a little sooner, but they arrived and were exactly what I needed.
One thing to think about though...these fit perfectly over my body kit with some minor notching of the flares. Without the body kit (side skirts), they may need a little more work to fit the contour of the body. But I suspect fussing with them will be minimal, especially when compared with ZG flares.
That was probably the biggest productivity booster I'd done...building shelves and getting stuff out of the way so I can actually do work.
d
d
#5024
Sin City Rotary
May has developed a bad smoking issue, may have tracked down the issue and probably one of the last things most folks would think of .... will know for sure in a couple days
#5025
'84 5-letter
iTrader: (5)
I couldn't help it, it's the first thing that came to mind, given your recent Fb travails. Video Link: http://youtu.be/Y9aKZZJvB0E
It's not all bad... After all is said and done The block will have a nice fresh paint job, non leaking OMP, non cracked water pump housing, rear-end dent removed, and maybe even a bit more porting
I realized that I haven't posted any pics since the wire tuck and MS3x install, will get those up as soon as I get her back. Lots of updates to catalogue, months worth of work