Pics of the Rx-7 that was built in 3 days.
#27
Billy I'll pull that strut rod stuff before SP-I goes to the crusher and bring them to the December OGTA.
Chris, I have a front strut assembly you can have that came from the Tan One (either side or both). You should have mentioned this during the rebuild!
I'll get a photo up of SP-I when the rain let's up, she's seen better days but she still has her dignity.
Chris, I have a front strut assembly you can have that came from the Tan One (either side or both). You should have mentioned this during the rebuild!
I'll get a photo up of SP-I when the rain let's up, she's seen better days but she still has her dignity.
#28
Sleeper but still slow
Thread Starter
iTrader: (1)
Join Date: Jan 2006
Location: Georgia
Posts: 1,766
Likes: 0
Received 0 Likes
on
0 Posts
Billy I'll pull that strut rod stuff before SP-I goes to the crusher and bring them to the December OGTA.
Chris, I have a front strut assembly you can have that came from the Tan One (either side or both). You should have mentioned this during the rebuild!
I'll get a photo up of SP-I when the rain let's up, she's seen better days but she still has her dignity.
Chris, I have a front strut assembly you can have that came from the Tan One (either side or both). You should have mentioned this during the rebuild!
I'll get a photo up of SP-I when the rain let's up, she's seen better days but she still has her dignity.
Yeah Billy, I told Ray you wanted something, but the voicemail was unclear(like static), I called you when I was up at Ray's the last time I went for clarity on what you needed, and you never answered or called me back so I forgot, but I did tell Ray you wanted me to pull somehting.
#29
I wasn't able to locate the pair of front struts from the Tan One, but they must be around here someplace, I'll look a little better when the rain stops. Good news is I stumbled onto two sets of front control rods, so Billy is covered even if the rain never ends and I don't get a chance to pull those parts from SP-I before she floats away.
In any event, you can have the front rotors and bearings from the White One, I can replace those parts new if I ever need to do strut work. I'll bring the rotors to the Dec. OGTA, along with your Pioneers.
Let's see your photo updates of SP-II!
Here's one last photo of Sexy Pants I, transitioning to that Great Rotary Place in the sky
In any event, you can have the front rotors and bearings from the White One, I can replace those parts new if I ever need to do strut work. I'll bring the rotors to the Dec. OGTA, along with your Pioneers.
Let's see your photo updates of SP-II!
Here's one last photo of Sexy Pants I, transitioning to that Great Rotary Place in the sky
#30
Chad Carson
iTrader: (29)
Join Date: Nov 2001
Location: South of Nashville TN. USA
Posts: 7,010
Likes: 0
Received 0 Likes
on
0 Posts
no, keep her alive. Cut it in half behind the doors and make it into a trailer. Then she will always be with you and there to help when ever. If I'd had known I would have grabbed it yesterday when I was at billy's house. I want to build a trailer and have a place to haul tools, cooler of beer, and other things you always need.
see pic below.
see pic below.
#34
Chad Carson
iTrader: (29)
Join Date: Nov 2001
Location: South of Nashville TN. USA
Posts: 7,010
Likes: 0
Received 0 Likes
on
0 Posts
You could cut the roof a few inches behind the windshield, then cut the a pillars very low and with a little heat the glue will pull away.
I say the olds guys club still needs a trailer as in the pics but one with a lower stance.
Thread
Thread Starter
Forum
Replies
Last Post
82streetracer
1st Generation Specific (1979-1985)
7
08-23-15 09:28 AM