*** 1st Gen 1/4 Mile Leader Board ***
#101
Double Ds for me to share
Thread Starter
Ok so since i cant edit my above post I'll just have to make another post for the cars new time. 14.156 @ 96mph with a 2.093 60' on street tyres
#105
Sk8r_dude ----------------------------- 14.87 @ 96.4 ------------------------------ 85 GS, 13B 6 port, Stockport (I believe), racingbeat aircleaner, holly 600 cfm carb, racingbeat intake, racing beat header, custom exhaust, accel race wires, NGK plugs, electric fan, 83 LSD, 14 inch rims, sumitomo HTR 200 205/60/14s
#107
Im coming for you L Bacon
iTrader: (8)
Join Date: Apr 2004
Location: Runnemede, New Jersey
Posts: 692
Likes: 0
Received 0 Likes
on
0 Posts
I was at the track last thursday and here are my numbers
I got two runs in
1st run 11.37 @ 123 with a 1.70 60ft.
2nd run 11.40 @ 121 with a 1.48 60ft. Missed 3rd gear
And then they told me not to come back until I get a Cage...
STREET CAR
S4 Turbo II motor Street port
Ford 8.8 rear
Street Radials
14lbs boost
I got two runs in
1st run 11.37 @ 123 with a 1.70 60ft.
2nd run 11.40 @ 121 with a 1.48 60ft. Missed 3rd gear
And then they told me not to come back until I get a Cage...
STREET CAR
S4 Turbo II motor Street port
Ford 8.8 rear
Street Radials
14lbs boost
#111
What rev limiter!?
Join Date: Sep 2005
Location: Streamwood
Posts: 129
Likes: 0
Received 0 Likes
on
0 Posts
Last time i went to the track i got 14.6 consistently and my best was
14.541 @ 93
1.96 60'
12A all rotor, Mild SP, Falken street tires, 8 lb flywheel, ACT clutch, 4.44 lsd rear end, Full exhaust, k&n filter, heating ducting ram air, etc
14.541 @ 93
1.96 60'
12A all rotor, Mild SP, Falken street tires, 8 lb flywheel, ACT clutch, 4.44 lsd rear end, Full exhaust, k&n filter, heating ducting ram air, etc
#117
Im coming for you L Bacon
iTrader: (8)
Join Date: Apr 2004
Location: Runnemede, New Jersey
Posts: 692
Likes: 0
Received 0 Likes
on
0 Posts
NEW TIME!!!!!!!!!! UP DATE!!!!!!
Well i finally broke the 10's at ATCO this past Friday....
Just bought slick for the car..
DWRX7
10.84 at 123 MPH
with Slicks
Street port
13b S4 Turbo
Street Car Full exhaust 3in to muffler
Microtech LT10
8.8 rear
Well i finally broke the 10's at ATCO this past Friday....
Just bought slick for the car..
DWRX7
10.84 at 123 MPH
with Slicks
Street port
13b S4 Turbo
Street Car Full exhaust 3in to muffler
Microtech LT10
8.8 rear
#121
Im coming for you L Bacon
iTrader: (8)
Join Date: Apr 2004
Location: Runnemede, New Jersey
Posts: 692
Likes: 0
Received 0 Likes
on
0 Posts
I have a video of the run.. My buddy has to convert it to put it on the computer...
I was boosting 14 lbs with street radial previous to this time at the track and it ran a 11.37 and 14 lbs on the street (it is a street car).. I wrap the down pipe the day before and put a set of slicks on the car.. I forgot to put the wastegate vacume hose back on so i was boosting over 20 lbs. it also was pump gas... I had to let off three time came too close to the wall and the center.. and to top it off I do not have cage...
I have a R85 turbo kit..
Another thing, the second run I broke the rear plate at the dowel pin near the oil filter because of the high boost and the motor was not pinned.
I will take a pics of the time sheet.. i will post it later on tonight... If you have any other questions PM me...
DWRX7
I was boosting 14 lbs with street radial previous to this time at the track and it ran a 11.37 and 14 lbs on the street (it is a street car).. I wrap the down pipe the day before and put a set of slicks on the car.. I forgot to put the wastegate vacume hose back on so i was boosting over 20 lbs. it also was pump gas... I had to let off three time came too close to the wall and the center.. and to top it off I do not have cage...
I have a R85 turbo kit..
Another thing, the second run I broke the rear plate at the dowel pin near the oil filter because of the high boost and the motor was not pinned.
I will take a pics of the time sheet.. i will post it later on tonight... If you have any other questions PM me...
DWRX7
#124
I only have 1.3liters
iTrader: (2)
Join Date: Mar 2006
Location: Manchester, TN
Posts: 816
Likes: 0
Received 0 Likes
on
0 Posts
Finally made it to a 1/4 mile.
Run from yesterday at Steele, AL.
1985 RX-7 GSL-SE w/S4 TII swap stock turbo with 3" intake and open 3
" downpipe, untuned Microtech LT10s, and Drag Radials.
R/T... .762
60'....2.015
330'...5.726
1/8...8.70
MPH...82.54
1/4...13.394
MPH...104.85
Run from yesterday at Steele, AL.
1985 RX-7 GSL-SE w/S4 TII swap stock turbo with 3" intake and open 3
" downpipe, untuned Microtech LT10s, and Drag Radials.
R/T... .762
60'....2.015
330'...5.726
1/8...8.70
MPH...82.54
1/4...13.394
MPH...104.85
#125
no u are not the only one any time u are in jersey drop a line ill give u a run for your money (fun way) dont get upset its just for fun have lot of friends and we all race