** Post Pictures Of Your 1st Gens - PICS ONLY**
#1477
Senior Member
There a lot of housings that work anwinsome guys in Face selling replacement sets that come with LEDsor you can install HIDs...
#1478
Full Member
Last edited by Rx7fb spirit r; 06-07-21 at 12:53 PM.
#1479
I modified them because the housings were a spare set i had for my Porsche 944. All I did was modify the mounting tabs so they would sit lower in the RX-7's housing and work with the trim ring. I didn't want HID's so I used led headlight bulbs similar to the ones I installed in my Porsche. Once I bought my 18 Camry, I fell in love with its led headlights. Naturally I had to try led headlights on my RX-7 and 944.
The following users liked this post:
raven12aFB (06-09-21)
The following 6 users liked this post by tommyeflight89:
Frankenrex (06-13-21),
mazdaverx713b (06-12-21),
raven12aFB (06-13-21),
Rx7fb spirit r (07-22-21),
XLNDRVR (10-14-21),
and 1 others liked this post.
The following 4 users liked this post by Maxwedge:
#1482
Rotary Enthusiast
I think you trimmed too much weight.
#1485
Senior Member
The following users liked this post:
Patrick Simpson (08-23-21)
The following users liked this post:
Patrick Simpson (08-23-21)
#1487
Rotary Enthusiast
Looks like you are having A LOT of fun. Agreed, those center caps are excellent. Source?
And you might want to put some chalk on rear spring perch to see if you are hitting your bump stops prematurely...with the new lowered springs you might want to cut them down.
Nice!
And you might want to put some chalk on rear spring perch to see if you are hitting your bump stops prematurely...with the new lowered springs you might want to cut them down.
Nice!
#1488
The center caps are custom made for me by as friend who is a graphic designer
The seats are awesome. They drag the roof slightly but otherwise a good choice
Last edited by Patrick Simpson; 08-23-21 at 10:50 PM.
#1489
I do plan on 13B swap soon. Either Kurt Robinson or Atkins Rotary. Both are within driving distance for me. Right now I'm running RB exhaust, stock 12a and RB Holley.
#1490
Full Member
** Post Pictures Of Your 1st Gens - PICS ONLY**
The following users liked this post:
Rx7fb spirit r (08-25-21)
#1493
Senior Member
Chuckwalla Raceway with my Shitbox
Went to the beautiful Chuckwalla Raceway that is literally in the middle of nowhere on September19th. With some 108 degree weather and no shade. Good times! The car performed well, on the last session it started to bogg on me. Was loosing power took it out of gear and revved the engine up. Then the car was back to normal. Decided to end the track day there still had to drive home 3 hrs.
The following 4 users liked this post by lwrobins:
The following 2 users liked this post by zerozoku:
Frogman (11-12-21),
Rx7fb spirit r (11-12-21)
The following 2 users liked this post by GtiKyle:
mazdaverx713b (11-15-21),
Rx7fb spirit r (11-12-21)